HXPD280 Four Head Paper Drilling Machine Performs Synchronous Multi-Hole Drilling with Pneumatic Drive and 50mm Stack Capacity

The Need for Efficient Multi‑Hole Drilling in Document Finishing
In print shops and binderies, drilling holes through stacks of documents, catalogs, calendars, or notebooks is a common but time‑consuming task. Single‑head drills require multiple passes, leading to inconsistent hole spacing and low throughput. The HXPD280 Four Head Paper Drilling Machine solves this by performing synchronous multi‑hole drilling on document stacks in one smooth cycle. Designed specifically for print shops and binderies, this machine dramatically increases productivity while ensuring accurate, evenly spaced holes across every stack.

HXPD280 Four Head Paper Drilling Machine

Pneumatic Cylinder Drive on Guide Columns and Linear Sliders
The HXPD280 Four Head Paper Drilling Machine features a robust pneumatic cylinder drive mounted on guide columns and linear sliders. This design ensures smooth, friction‑free vertical movement of the drill heads, reducing wear and maintaining alignment over thousands of cycles. The pneumatic system delivers consistent drilling force, producing clean, burr‑free holes regardless of paper thickness or density. Operators can easily adjust the vertical stroke manually to match different stack heights, giving fine control over drilling depth.

Handles Stock Up to 50mm Thick with 3‑10mm Drill Bits
The HXPD280 Four Head Paper Drilling Machine is built for heavy‑duty finishing. It processes stock up to 50 mm thick – that’s approximately 500 sheets of 80gsm paper in a single pass. Drill bits from 3 mm to 10 mm in diameter are supported, covering most common hole sizes for binding, filing, or calendar hanging. Whether you need small holes for spiral binding or larger holes for post binders, this machine delivers. The four heads work simultaneously, so a four‑hole pattern is completed in one cycle, saving significant time compared to single‑head drilling.

Flexible Setup: Adjustable Head Positions, Back Margin, and Worktable
Versatility is a key strength of the HXPD280 Four Head Paper Drilling Machine. Setup features include:

• Individual head positions – hole distances adjustable from 40 to 280 mm to match different binding systems

• Back margin adjustment – from 6 to 40 mm to position holes at the correct distance from the paper edge

• Lateral worktable positioning – 200 mm travel to accommodate varying paper formats and allow multiple hole patterns on the same sheet

These manual adjustments are simple to make and hold their settings securely, allowing operators to switch between different document sizes and hole patterns in minutes without tools.

A Productivity Workhorse for Print Shops and Binderies
For any print shop, bindery, or finishing department that regularly drills holes through document stacks – whether for coil binding, comb binding, post binding, or calendar production – the HXPD280 Four Head Paper Drilling Machine is a reliable, high‑output solution. Four heads drill synchronously, up to 50 mm stack thickness, with 3‑10 mm bits. Flexible adjustments for hole spacing, back margin, and worktable position handle a wide range of paper formats. Pneumatic drive ensures clean, consistent holes and long machine life. Upgrade your paper drilling – and drill four holes in the time it used to take to drill one.